SensenichDirect

SensenichDirect Cessna Aircraft Propellers

All Spinners available from Airframe Manufacturer unless otherwise noted!

NOTE: The weights given here are an average. Due to tolerances and repairs, we strongly recommend that you weigh your specific propeller for weight and balance purposes.
AIRCRAFT ENGINE STANDARD CLIMB CRUISE WEIGHT *
Cessna 120, 140 Continental C-85 76AK-2-44 76AK-2-42 24.00 lbs. 1/9
Cessna 120S, 140S Continental C-85 76AK-2-40 24.00 lbs. 1/9
Cessna 150, thru 150K Continental O-200 69CK-0-50L 69CK-0-48L 24.00 lbs. 5
Cessna 150L, A150L, 150M, A150M Continental O-200 69CKS12-0-50L 69CKS12-0-48L 69CKS12-0-52L 34.40 lbs. 7G 12
Cessna 150 (ALL) Lycoming O-320/150 74DM6S5-0-58 35.40 lbs. 7D
Cessna 150 S.P. (ALL) Lycoming O-320/ 150 74DM6S5-0-() 35.40 lbs. 7D
Cessna 152 Lycoming O-235 110 72CKS6-0-54 72CKS6-0-52 72CKS6-0-56 28.40 lbs. 7B
Cessna 152 Lycoming O-235 125 72CKS6-0-54 72CKS6-0-52 72CKS6-0-56 28.40 lbs. 7B
Cessna 152 Lycoming O-235 110 72CKS6-0-54 72CKS6-0-56 28.40 lbs. 7G 12
Cessna 170 Continental C-145 74DR-0-56 74DR-0-54 74DR-0-58 32.20 lbs. 12
Cessna 170 / 180 HP Lycoming O-360 76EM8S5-0-56 76EM8S5-0-54 76EM8S5-0-60 37.50 lbs. 7D
Cessna 170A, 170B Lycoming O-360-A4M 76EM8S5-0-58 76EM8S5-0-56 76EM8S5-0-60 37.50 lbs. 7I
Cessna 172 Continental O-300-A,-B 74DR-0-55 74DR-0-53 74DR-0-56 32.20 lbs. 12
Cessna 172, thru 172C Continental O-300-C, D 74DC-0-56 31.10 lbs. 10
Cessna 172 thru 172H Lycoming O-360-A4M 76EM8S5-0-58 76EM8S5-0-56 76EM8S5-0-60 37.50 lbs. 7I
Cessna 172I, thru M Lycoming O-320 /150 74DM7S14-0-58 74DM7S14-0-56 74DM7S14-0-60 38.40 lbs. 7G 12
Cessna 172N, 172P Lycoming O-320 /160 74DM7S14-0-58 74DM7S14-0-56 74DM7S14-0-62 38.40 lbs. 7G 12
Cessna 172, 172A Lycoming O-360/ 180 76EM8 SERIES 34.50 lbs. 7C
Cessna 172 Lycoming O-360/ 180 76EM8SPY-0-60 42.70 lbs. 7F
Cessna 172I, thru 172P Lycoming O-360/ 180 76EM8S14-0-60 42.90 lbs. 7C
Cessna 172F, thru 172P Lycoming O-360/ 180 76EM8S14-0-60 42.90 lbs. 7A
Cessna 172 Lycoming O-360/ 180 76EM8S5-0-56 37.50 lbs. 7D
Cessna P172D Lycoming O-360-A4M 76EM8S5-0-58 76EM8S5-0-56 76EM8S5-0-60 37.50 lbs. 7I
Cessna 175 Lycoming O-360/ 180 76EM8 SERIES 34.50 lbs. 7D
Cessna 175 thru 175C Lycoming O-360-A4M 76EM8S5-0-58 76EM8S5-0-56 76EM8S5-0-60 37.50 lbs. 7I
Cessna 177 Lycoming O-360/ 180 76EM8 SERIES 34.50 lbs. 7D

* HUB NOTES

When Climb/Cruise propellers are recommended, the lower pitch (Climb Prop) can be expected to offer better take-off, climb, and high-altitude performance. The higher pitch (Cruise) propeller should be chosen only if take-off and climb are not critical.
These notes do not supersede Aircraft Type Certificates, A.D.'s, or Service Bulletins.

  1. The attaching kit for a flanged shaft will be supplied for all Continental installations unless tapered shaft installation is specified in order.
  2. Specify 74CKL attaching kit when ordering for Lycoming O-145 installation.
  3. 74DM6S5-0-58 propeller eligible only on Beech Model B19, S/N MB-481 through MB-616, at 2000 lb. gross weight. 74DM6S5-0-54 propeller eligible on Beech Model B19 at 2150 lb. gross weight. See T.C. data sheet A1CE.
  4. 8.00-6 tires required when 74DM6 propeller is installed on Bellanca 7GCBA. See T.C. data sheet A-759.
  5. Use Cessna 0450021-1 spinner and 0450020-1 bulkhead or Sensenich C2401 spinner assembly with installation of 69CK-0-52 propeller on Cessna 150.
  6. Placard required to avoid continuous operation from 2150 rpm to 2350 rpm. Applies to 76EM8 series propellers installed on Lycoming O-360 engines except O-360-A4 series with solid front main bearing journal crankshaft. For more info see Service Bulletin R-13, Service Bulletin R-14A, and Airworthiness Directive 69-09-03-R3
  7. Supplemental Type Certificate Installations (SEE BELOW)
  8. Placard required to avoid operation above 2600 RPM.
  9. Propeller back in production
  10. No Spinner Available
  11. Sensenich Spinner Available
  12. Flight Manual Supplement Available
  13. The Lycoming O-320 series engine flange bushings use either 3/8 or 7/16 inch hardware to mount the propeller. You must check your flange bushings and specify a 74DM6 or 70CM6 for 3/8 inch and a 74DM7 or 70CM7 for 7/16.

SUPPLEMENTAL TYPE CERTIFICATE NOTES:

  1. Air Plains Services (316) 326-8581
  2. Air Mods NW (425) 334-3030
  3. Alphin Aircraft (301) 733-7604
  4. Avcon Conversions (316) 782-3851
  5. Dale Schultz (630) 554-8699
  6. Penn Yan Aero Service (315) 536-2333
  7. Sensenich Propeller Manufacturing Co. (717) 569-0435
  8. Fletch-air 800-329-4647
  9. Del-Air (559) 784-9440
Order Form ButtonVisaMasterCard
[ US WITH QUESTIONS]
Or phone (717) 569-0435
Or fax (717) 560-3725
The Back to the SensenichDirect Propeller Page Goto Button To SensenichDirect Propeller Directory
The Back to the Main Page Goto Button Return To Main Menu

You have been visiting: http://www.sensenich.com